CR50M-760 Conveyor Wear Strip
CR50M-760 identifies a conveyor wear strip with a nominal molecular-weight reference of 7,600,000. Select it against the existing strip section and the chain's running position.
- Model
- CR50M-760
- Nominal Grade Reference
- 7,600,000
- Role
- Conveyor sliding support
Carry the Full Code into the Enquiry
Retain the M-760 designation when sending a section drawing or a sample reference for comparison.
Identify the Grade Before Comparing the Fit
The CR50M-760 code identifies the requested wear-strip grade. Its sliding surface supports the moving conveyor chain, while the strip's lower section must seat in the intended support.
Use the nominal grade as an identification reference. Friction and wear in service also depend on the mating chain, contact pressure and running conditions. A grade number alone cannot predict the replacement interval or establish suitability for a different conveyor.
Specifications
| Parameter | Specification |
|---|---|
| Model | Specification: CR50M-760 |
| Nominal molecular-weight reference | Specification: 7,600,000 |
| Component type | Specification: Conveyor wear strip |
Check the Supporting Section Beneath the Chain
Compare a cross-section of the existing strip with the beam seat. Identify the running face, retaining features and required lengths. Include any bend or transition where the strip changes direction.
The fixing arrangement must accommodate the strip along its route. Check the position of fixed points and joints against the operating temperature before finalizing cut lengths.
Keep Replacement Identification Traceable
Where a maintenance specification calls for CR50M-760, retain that code through inspection, ordering and fit review. This helps avoid selecting a similar profile on appearance alone.
Inspect the chain-contact surface and the seat beneath it when replacing a strip. Local wear at an entry or joint should prompt a check of alignment and contact rather than an assumption that changing grade will resolve the cause.
Review Your CR50M-760 Requirement
Send the existing strip reference, section drawing, required lengths and quantity. Include chain type and temperature so CSTRANS can review the intended running conditions.
To use the enquiry form, allow Google reCAPTCHA in your cookie preferences. You can also contact us by email or phone.
Email Our Team+86 159 2160 2717