H1723TAB Case Conveyor Chain
H1723TAB combines a shaped POM carrying plate with a lower chain body. Left and right plate profiles make orientation part of the selection, especially where the carrying surface meets the guide track.
- Model
- H1723TAB
- Width
- 114.3 mm
- Plate Material
- POM
Identify Left and Right Against Travel
Mark travel direction on the drawing before choosing the handed plate arrangement.
A Handed Plate Above the Chain Body
The H1723TAB carrying outline includes a shaped side transition. Left and right forms present different edges to the route, so a width match alone is insufficient to choose the replacement.
The top and lower body are separate parts of the assembly. Compare how the plate attaches and sits above the track, then review its handed edge against travel direction and the neighboring support.
Specifications
| Parameter | Specification |
|---|---|
| Model | Specification: H1723TAB |
| Carrying width | Specification: 114.3 mm / 4.5 in |
| Plate material | Specification: POM |
| Reference chain mass | Specification: 3.2 kg/m / 2.150 lb/ft |
| Listed working load | Specification: 7,200 N / 1,619 lbf |
Assess the force value for the assembled route and operating conditions. It does not define a case-weight capacity.
Compare the Handed Edge and Lower Assembly
Provide the plate outline with a travel arrow and indicate the side viewed. Check the top height and lateral clearance where the shaped edge meets guides or adjacent chain lanes.
Compare the lower link and attachment with the installed track and drive. Confirm link spacing from the dimensional drawing before selecting a wheel.
Supporting Products at a Guided Transition
A handed plate arrangement is relevant where the chain surface meets a particular side of the conveyor route. Its orientation affects the edge presented to the product or adjacent support.
During replacement, matching the old plate's handedness helps preserve that relationship. Check the product base through the transition rather than assuming both orientations present the same edge.
Specify the H1723TAB Hand
Send the left or right arrangement marked against travel direction, required chain length and quantity. Include the plate and lower-track drawing for CSTRANS to review the complete assembly.