CC600TAB Case Conveyor Chain
CC600TAB adds lower guide tabs to the CC600 case-chain form. The 42 mm carrying plates support the product while the tabs engage a matching track beneath the running lane.
- Plate Width
- 42 mm
- Pitch
- 63.5 mm
- Guidance
- Lower tabs
Confirm the Captured Track Profile
The chain's lower tab clearance matters independently of the carrying width.
Matching Sprocket
For CC600-series chains. Confirm the tooth count and shaft opening.
Matching Sprocket
For CC600-series chains. Confirm the tooth count and shaft opening.
Guide the Chain Below the Case
CC600TAB links use an articulated carrying body with tab projections below it. The matching track captures that lower form through the route.
The tabs guide the chain, while the case still relies on its support lanes and product guides. Keep those functions separate when checking a multi-lane curve or replacing a plain CC600 chain with a tabbed form.
Specifications
| Parameter | Specification |
|---|---|
| Plate / pin | Specification: POM / stainless steel |
| Colour | Specification: White |
| Width / pitch | Specification: 42 mm / 63.5 mm |
| Minimum side-flex / reverse radius | Specification: 600 mm / 75 mm |
| Reference mass | Specification: 2.13 kg/m |
| Listed working load | Specification: 3,000 N |
| Listed operating temperature | Specification: −35 to 90 °C |
| Listed maximum speed, lubricated | Specification: 50 m/min |
| Listed maximum speed, dry | Specification: 25 m/min |
| Listed conveyor length | Specification: ≤12 m |
| Nominal link count | Specification: 16 per metre |
Working load is chain force, not case weight. Review speed, temperature and route together for the intended operation.
Check the Tabs Across Track Transitions
Compare the complete lower profile with the track opening and curve joints. Confirm how the chain enters and leaves any captured section.
Review sprocket engagement and the vertical return path using the tabbed chain drawing. For parallel lanes, verify support under the case through the curve.
Retained Guidance on a Case-Handling Route
A tabbed running lane is relevant where the conveyor track needs to retain the chain through a turn. It can support rigid cases while the guided links follow the route beneath them.
Dry and lubricated operation have different listed speed limits. The selected operating condition should match the line's lubrication practice, especially where products wait or the chain changes direction.
Review Your CC600TAB Arrangement
Send the track section, required chain length and quantity. Include the case-base layout, curve plan and lubrication condition so CSTRANS can review the tabbed running lane.