2720 Machined Modular Belt Sprocket
This machined 2720 sprocket is intended for the 27.2 mm pitch modular-belt family. Specify its tooth count and shaft connection against the actual belt and conveyor-end layout.
- Series
- 2720
- Manufacturing Method
- Machining
- Matching Belt Pitch
- 27.2 mm / 1.0709 in
Identify the Machined Configuration
Keep the manufacturing reference with the enquiry. A moulded sprocket table does not define the dimensions of this machined version.
Match the Belt Engagement and the Machined Body
The 2720 reference identifies the modular-belt family and its 27.2 mm pitch. The sprocket teeth need to engage the belt's underside features at the intended positions. Pitch is a starting reference rather than a complete compatibility check.
The requested component is a machined configuration. Tooth count, outer envelope and hub geometry should be established from the required sprocket drawing or existing part. Confirm these details directly when replacing a sprocket in an established shaft assembly.
Specifications
| Parameter | Specification |
|---|---|
| Series | Specification: 2720 |
| Manufacturing method | Specification: Machining |
| Matching belt pitch | Specification: 27.2 mm / 1.0709 in |
Use the Required Sprocket Section
Provide the existing tooth count and a section showing the bore, hub and tooth width. Check the pitch diameter and outside diameter against the end-frame clearance and belt path.
Show the shaft connection and axial retention. For multiple sprockets, identify their contact positions beneath the belt and the available movement or location required by the assembly design.
Replace a Machined Sprocket in an Existing Belt Drive
An installed modular-belt drive may need a machined sprocket with a particular shaft connection or body envelope. Reproducing that arrangement requires the part geometry as well as the belt-family reference.
At the conveyor end, the selected tooth count sets the belt's turning path. Inspect clearances to the frame and adjacent transfer before changing that count or the hub shape.
Define Your Machined 2720 Sprocket
Send the belt reference, tooth count, shaft drawing and quantity. Include a drawing or measured section of the existing machined sprocket and identify drive or idler use.